Fall2009_Final

The SmartSurfaces final review was on December 11, 2009.







The Shy Solar Array: An Adaptive Solar Array That Responds To Weather

Arrays of solar cells are vulnerable to their surroundings, do not maximize the sunlight-collecting surface area, and are unattractive.  Inspired by the Mimosa Pudica plant and its tendency to shy away from external stimuli, our shy solar array was created.  Our solar array protects itself from damaging elements such as snow or rain by flipping away from them.  This will allow the solar array to be implemented in less than ideal weather locations, such as Michigan.  Our solar array also maximizes the sun collecting surface area through its unique shape.  The form of the array lends itself to a more efficient use of surface area by avoiding shadowing when the cell is rotated towards the sun.  Also, the array stands out as a more desirable object that can serve as a stand-alone artifact as well as a useful solar array.  Outside of the gallery this solar array would be implemented onto the rooftop of Michigan Engineering buildings as an alternative energy source.  To further maximize the collected energy, the solar array should contain solar cells that are specially shaped to the design. 

Team Fabric + Super J
Alyssa Ackerman – School of Art and Design
Johanna Brand – Taubman College of Architecture and Urban Planning
Yuming Jiang – Material Science and Engineering
Chris Johnson – Taubman College of Architecture and Urban Planning
Mat Schwartz - School of Art and Design
Michelle Svetkoff - Material Science and Engineering








The iWall Modular Light-Filtration System


The wall you see here is a modular, scalable, self-adjusting multi-aperture window, designed to optimize light flow into a room by manipulating the position of rotating wood panels.  You could call it an 'automatic venetian blind',  as that is the gist of the purpose. The system consists of 30 individual modules, with one panel per module, which allow a variable amount of light to pass through.  The structural elements are built modularly, but circuitry elements - such as wiring - are set up in a non-modular fashion.  Individual module apertures open and close in reaction to the intensity of the light that passes through the wall as detected by light-dependent resistors (LDRs), seen on the projection side, holding a relatively constant light level on the ‘interior’ of the wall at all times - this gives 'heliotropic' and 'smart' characteristics to the wall - 'surface', fitting it into the premise of the SmartSurfaces course.  The actual actuation is by a grid of servos powered externally and controlled through inputs from an Arduino Mega and the LDRs.  The materials used in the assembly of the individual modules were 3/16" cast acrylic cut by laser and 3/16" 6061 aluminum sheet cut by water jet.

Team iWall
Westley Josiah Burger
- Taubman College of Architecture and Urban Planning
Peter Hall - School of Art and Design
Brieana MacDonald - Taubman College of Architecture and Urban Planning
Michael Mathieu - Material Science and Engineering
Taylor McKenzie-Veal - School of Art and Design
Neil Poulin - Material Science and Engineering







Simon


Simon is a heliotropic, feel-good machine. He interacts with a user through motion and LED color mixing and enters a default solar-tracking mode when not in use. Face recognition technology, a simple joint system, and a flexible LED array make possible a wide range of movement and interaction while photovoltaic panels provide the power. By fusing emotional connections with the user, we hope to transform the concept of sustainability from a condition of sacrifice to that of pleasure.

Team Softcore
Rachel Boswell - School of Art and Designn
Eric Harman - School of Art and Design
Marc Maxey - Taubman College of Architecture and Urban Planning
Lindsey May - Taubman College of Architecture and Urban Planning
Damien Stonick - Material Science and Engineering
Zilin Wang - Material Science and Engineering







Exposure


Rather than using solar cells to convert sunlight into electrical energy, we are concerned with using the power of the sun in a more direct way. Exposure is a biological, heliotropic lighting system powered by photosynthesis. Living inside the piece are several Dinoflagellates, Pyrocystis fusiformis, aka bioluminescent algae. The bioluminescence of the organisms are set to a biological clock quite similar to our sleep cycle. During 12 hours of daylight Pyrocystis use the available light to photosynthesize, producing their own food and oxygen. At sunset the cells produce the chemicals that cause the luminescent reaction. If agitated during their 12-hour dark cycle, the algae give off a glowing blue light. In Exposure we have harvested several bioluminescent algae organisms, and embedded them into an architectural array. Within the array, varying panel heights correspond to the density of algae organisms contained in each unit. Infrared sensors located below the panels detect human presence, and trigger a motor. Attached to the motors, a cam makes contact with the panels creating enough motion to agitate the algae and expose their bioluminescent glow.

Team Slime
Ivan Adelson - Taubman College of Architecture and Urban Planning
Aidan Feldman - Computer Science Engineering & Department of Dance
Isaac Krauss - School of Art and Design
Laura Ligeski - Material Science and Engineering
Allison Sturm - School of Art and Design
David Theisz - Taubman College of Architecture and Urban Planning






Comments